RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-107 Assembly (Cont'd) Figure 60-80-105 P-61964 Install the valve cover [Figure 60-80-107] . P-61962 Tighten the bolts to 6-7 ft.-lb. (8-10 N•m) torque. Figure 60-80-108 Apply anti-seize to the studs. Install the nuts on the exhaust manifold studs and tighten to 17-20 ft.-lb. (22,5- 27,5 N•m) torque [Figure 60-80-105] . Figure 60-80-106 P-61965 Install a new gasket on the oil cooler. Install the oil cooler [Figure 60-80-108] . P-61963 Install the valve cover gasket [Figure 60-80-106] . 442 Excavator 60-80-29 Service Manual