RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-111 Assembly (Cont'd) Figure 60-80-109 P-61968 Hand tighten the fuel filter [Figure 60-80-111] . P-61966 Figure 60-80-112 Tighten the bolts to 14-17 ft.-lbs (19-23 N•m) torque [Figure 60-80-109] . Figure 60-80-110 P-61969 Lightly oil the oil filter gasket. Install the oil filter. Hand tighten the oil filter [Figure 60-80-112] . P-61967 Install seals on the fittings [Figure 60-80-110] . Tighten the fittings to 33-41 ft.-lb. (45-55 N•m) torque. Lightly oil the fuel filter gasket. Install the fuel filter. 442 Excavator 60-80-30 Service Manual