Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-119 Assembly (Cont'd) Figure 60-80-117 P-61976 Install the fuel pump. Install the bolts [Figure 60-80-119] . P-61974 NOTE: Do not tighten the bolts at this time. Figure 60-80-120 Install and tighten the coolant pump bolts to 14-17 ft.-lb. (19-23 N•m) torque [Figure 60-80-117] . Figure 60-80-118 P-61977 Install new seals on the fuel lines. Install the fuel lines [Figure 60-80-120] . P-61975 Install a new seal and insulating hose (if equipped) on the temperature sensor. Install the temperature sensor and tighten to 12-15 ft.-lb. (16-20 N•m) torque [Figure 60-80- 118] . 442 Excavator 60-80-32 Service Manual