RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-123 Assembly (Cont'd) Figure 60-80-121 P-61980 Trim the gasket [Figure 60-80-123] . P-61978 Figure 60-80-124 Turn the engine 180°. Install a new gasket. Install the oil suction pipe and retainer [Figure 60-80-121] . Figure 60-80-122 P-61981 Put sealing compound on the sealing surface of the oil pan [Figure 60-80-124] . P-61979 Tighten the flange bolts first then the retainer bolts to 14- 17 ft.-lb. (19-23 N•m) torque [Figure 60-80-122] . 442 Excavator 60-80-33 Service Manual