RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-131 Assembly (Cont'd) Figure 60-80-129 Install the bolts and tighten in the order shown 1-2-3-4-5 to 11-14 ft.-lb. (15.5-18.5 N•m) torque [Figure 60-80- 131] . P-61986 Figure 60-80-132 Clean and dry the sealing surface of the governor. Apply a 0.06-0.07 in. (1,5-2,0 mm) bead of sealing compound to the sealing surface of the governor [Figure 60-80- 129] . Figure 60-80-130 P-61989 Lightly grease and install the O-ring on the cover [Figure 60-80-132] . P-61987 Turn the engine 180°. Install the governor [Figure 60-80- 130] . 442 Excavator 60-80-35 Service Manual P-619 P-619 88