RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-135 Assembly (Cont'd) Figure 60-80-133 P-61992 Connect the wire harness to the governor [Figure 60-80- 135] . P-61990 Figure 60-80-136 Install the cover and tighten the bolts to 14-17 ft.-lb. (19- 23 N•m) torque [Figure 60-80-133] . Figure 60-80-134 P-61993 Connect the wire harness to the shutoff solenoid [Figure 60-80-136] . P-61991 Install the plate on the governor and tighten the bolts to 14-17 ft.-lb. (19-23 N•m) torque [Figure 60-80-134] . 442 Excavator 60-80-36 Service Manual