RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-143 Assembly (Cont'd) Install the starter. Tighten the bolts to 52 ft.-lb. (70 N•m) torque. Figure 60-80-141 P-63000 Install new seals on the breather pipe [Figure 60-80- 143] . Figure 60-80-144 P-61998 TIghten the collar to 30 ft.-lb. (40 N•m) torque (if equipped [Figure 60-80-141] . Figure 60-80-142 P-63001 Install the breather and tighten the bolts to 7-9 ft.-lb. (10- 12 N•m) torque [Figure 60-80-144] . P-61992 Connect the wire harness and clips [Figure 60-80-142] . 442 Excavator 60-80-38 Service Manual