Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-147 Assembly (Cont'd) Figure 60-80-145 P-63004 Connect the wire harness to the temperature sensor [Figure 60-80-147] . P-63002 Figure 60-80-148 Install the air pipe on the manifold pressure compensator [Figure 60-80-145] . Figure 60-80-146 P-63005 Install a seal on the oil pressure switch. Install and tighten the oil pressure switch to 12-15 ft.-lb. (16-20 N•m) torque [Figure 60-80-148] . P-63003 Install the lift brackets and tighten to 32-38 ft.-lb. (43-51 N•m) torque [Figure 60-80-146] . 442 Excavator 60-80-39 Service Manual