RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-151 Assembly (Cont'd) Figure 60-80-149 P-63008 Lightly grease the bore in the cylinder head. Install the pressure control valve [Figure 60-80-151] . P-63006 Figure 60-80-152 Connect the wire harness to the oil pressure switch [Figure 60-80-149] . Figure 60-80-150 P-63009 Install the bolts in the crankcase breather. Tighten the bolts to 6-7 ft.-lbs (7,5-9,5 N•m) torque [Figure 60-80- 152] . P-63007 Install the seal, pressure control valve and sleeve on the crankcase breather [Figure 60-80-150] . 442 Excavator 60-80-40 Service Manual