Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-155 Assembly (Cont'd) Figure 60-80-153 P-63012 Install the adapter [Figure 60-80-155] . P-63010 Figure 60-80-156 Apply sealing compound to the coolant pipe. Install the coolant pipe and tighten the bolts to 14-17 ft.-lb. (19-23 N•m) torque [Figure 60-80-153] . Figure 60-80-154 P-63013 Install a new gasket. Install the turbo charger [Figure 60- 80-156] . P-63011 NOTE: Prelubricate the turbo charger by spraying a drop of oil into the oil supply line. Apply a light coat of grease on the O-rings. Install the O- rings on the adapter [Figure 60-80-154] . 442 Excavator 60-80-41 Service Manual