Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-159 Assembly (Cont'd) Figure 60-80-157 P-63015 Apply a light coat of grease to the O-rings. Install the O- rings on the oil return pipe [Figure 60-80-159] . P-63014 Figure 60-80-160 Apply anti-seize to the studs. Install the nuts and tighten to 14-17 ft.-lb. (19-23 N•m) torque [Figure 60-80-157] . Figure 60-80-158 P-63017 Install the oil return pipe [Figure 60-80-160] . P-63016 Install a new seal on the plug. Install the plug and tighten to 28-31 ft.-lb. (38-42 N•m) torque [Figure 60-80-158] . 442 Excavator 60-80-42 Service Manual