RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-163 Assembly (Cont'd) Install the oil pressure pipe. Install seals on the bolts. Figure 60-80-161 P-63020 Install the elbow [Figure 60-80-163] . NOTE: Do not tighten the hose clamp at this time. P-63018 Figure 60-80-164 Tighten the bolt (Item 1) to 19-24 ft.-lb. (26-32 N•m) torque. Tighten the bolt (Item 2) [Figure 60-80-161] to 26-32 ft.-lb. (35-43 N•m) torque. Figure 60-80-162 P-63021 Install the breather hose. Tighten the hose clamps [Figure 60-80-164] . P-63019 Install the intake hose [Figure 60-80-162] . 442 Excavator 60-80-43 Service Manual