Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-171 Assembly (Cont'd) Figure 60-80-169 P-63028 Adjust the fan/fuel pump belt tension by applying approximately 33 lbs (15 kg) force on the belt. The belt should deflect 0.40 in. (10 mm). Tighten the bolts to 14- 17 ft.-lb. (19-23 N•m) torque [Figure 60-80-171] . P-63026 Install the adjusting bracket with bushings and bolts [Figure 60-80-169] . Figure 60-80-172 NOTE: Do not tighten the bolts at this time. Figure 60-80-170 P-63029 Install the alternator belt [Figure 60-80-172] . P-63027 Install the fan/fuel pump belt [Figure 60-80-170] . 442 Excavator 60-80-45 Service Manual