Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-175 Assembly (Cont'd) Figure 60-80-173 P-63032 Install the engine mount bracket [Figure 60-80-175] . Tighten the bolts to 192 ft.-lb. (260 N•m) torque P-63030 Figure 60-80-176 Adjust the alternator belt tension by applying approximately 33 lbs (15 kg) force to the belt at the mid span of the belt. Tighten the bolts to 22 ft.-lb. (30 N•m) torque [Figure 60-80-173] . Figure 60-80-174 P-63033 Install the engine mount bracket [Figure 60-80-176] . Tighten the bolts to 70 ft.-lb. (95 N•m) torque. P-63031 Remove the engine from the engine stand. Install the wire harness on the alternator [Figure 60-80- 174] .

442 Excavator 60-80-46 Service Manual