OPERATION Press the travel speed selector switch to change the travel speed mode. For details of the travel speed selector switch, See “Travel Speed Selector Switch” on page 2-30. When the travel speed is changed, the pilot monitor display at the top right of the monitor screen is highlighted in yellow for two seconds, then returns to blue. When the travel speed mode is changed, the screen returns to the standard screen. To display the camera image, press switch F3 again. Press the auto-deceleration switch to turn the auto-deceleration function ON/OFF.
Even if the auto-deceleration switch is pressed, the camera image display screen does not switch to another screen or return to the standard screen display. It is possible to press the buzzer cancel switch to stop the alarm buzzer for the warning item where there is an abnormality. Even if the buzzer cancel switch is pressed, the camera image display screen does not switch to another screen or return to the standard screen display. 2-38 PC200LC-8