OPERATION 2. On the Breaker Select screen, select one of the two set values for the oil flow, then press switch F6. The default values for the flow setting are both set to 180 liter/ min, as shown in the illustration on the right. To select the oil flow setting, follow the procedure given in “Changing Breaker Flow Setting” on page 2-51. The present oil flow set for B mode is marked with a B in front of the item name as shown in the illustration on the right. On the Breaker Select Menu and breaker setting selection menu, it is possible to carry out the following operations with switches F3 - F6. F3: Moves to next item (1 line down). F4: Moves to previous item (1 line up). F5:
Returns to user menu screen. F6: Switches to setting screen for selected item. 2-50 PC200LC-8