OPERATION CONTROL LEVERS AND PEDALS 1. Lock lever 3. Left work equipment control lever (with auto-deceleration system) 2. Travel levers (with pedal and auto-deceleration system) 4. Right work equipment control lever (with auto-deceleration system) Lock Lever When standing up from the operator's seat, push lock lever (1) down securely to set it to LOCK position (L). If lock lever (1) is not in LOCK position (L) and the control levers are touched by mistake, it may lead to serious personal injury. Check lock lever (1) is placed securely at LOCK position (L). Be careful not to touch the work equipment control levers when pulling lock lever (1) up or pushing it down.
This lever (1) is a device to lock the work equipment, swing, travel, and attachment (if equipped) control levers. (L) LOCK position: Even when levers or attachment control pedal (if equipped) are operated, machine does not move (F) FREE position: Machine moves according to operation of levers or attachment control panel (if equipped) Remark This lock lever is a hydraulic lock type. Accordingly, when it is in the lock position (L), the control levers or con- trol pedals move but the machine does not move. 2-80 PC200LC-8