Komatsu — Air Conditioner Control Panel

OPERATION Fan Switch Switch (2) is used to adjust the air flow. The air flow can be adjusted to six levels. Press the Δ switch to increase the air flow; press the switch to decrease the air flow. During auto operation, the air flow is automatically adjusted. Monitor display and air flow A: Liquid crystal display B: Air flow a: Air flow “low“ b: Air flow “medium 1“ c: Air flow “medium 2“ d: Air flow “medium 3“ e: Air flow “medium 4“ f: Air flow “high“ Switch (3) is used to control temperature inside the cab. The temperature can be set between 18°C (64.4°F) and 32°C (89.6°F).

Temperature Control Switch Press the Δ switch to raise the set temperature; press the switch to lower the set temperature. The temperature is generally set at 25°C (77°F). The temperature can be set in stages of 0.5°C (0.9°F). Remark If the mode is set to auto mode and the temperature setting is set to 18.0 °C (64.4 °F) and to 32.0 °C (89.6 °F), the air flow from the fan is always set to HIGH and does not change even when the set temperature is reached. 2-94 PC200LC-8 Monitor display (°C) Set temperature 18.0 Max. cooling 18.5 to 31.5 Adjusts temperature inside cab to set temperature 32.0 Max. heating