OPERATION FUSIBLE LINK If the starting motor is not cranked when the starting switch is turned START, there is probably a disconnection in fusible link (1) (two places). Open the battery box cover on the right side of the machine and carry out inspection and replacement. Remark A fusible link refers to the large-sized fuse wiring installed in the high current flow portion of the circuit to protect electrical components and wiring from burning, in the same way as an ordinary fuse. CONTROLLER Controller installed. Remark Be careful not to get water, mud, or juice on the controller. This will cause failure. If any problem occurs in the controller, do not disassemble it yourself.
Contact your Komatsu distributor for repairs. TOOL BOX This is used for keeping the tools. GREASE GUN HOLDER This is inside the battery room door on the left side of the machine. When not using the grease gun, fit it in this holder. PC200LC-8 2-113