Komatsu — Seat Belt Inspection

If your machine is equipped with a shoulder harness also, inspect the webbing, the shoulder loop web guide and the height adjuster for wear, damage and proper function capabilities OPERATION Seat Belt Before fitting the seat belt, check that there is no problem in the belt mount bracket or mounting belt. If it is worn or damaged, replace the seat belt. Even if no problem can be seen in the belt, replace the seat belt every three years. The date of manufacture of the belt is shown on the back of the belt. Always wear the seat belt during operations. Fit the seat belt so that it is not twisted.

Fastening and Removing This seat belt has a wind-in device, so it is not necessary to adjust the length. Fastening Seat Belt Hold grip (2) and pull the belt out from wind-in device (1), check that the belt is not twisted, then insert tongue (3) into buckle (4) securely. When doing this, pull the belt lightly to check that it is properly locked. Removing Belt Press button (5) in buckle (4), and remove tongue (3) from buckle (4). The belt is automatically wound in, hold grip (2) and return the belt slowly to wind-in device (1). PC200LC-8 2-131