Komatsu — Operations Before Starting Engine

OPERATION A. The buzzer sounds for approximately two seconds, then the monitor or meter lights up for approximately two seconds. Radiator coolant level monitor (4) Charge level monitor (5) Engine oil pressure monitor (6) Engine oil level monitor (7) Air cleaner clogging monitor (8) Water separator monitor (9) Engine coolant temperature gauge (10) Fuel level monitor (13) If any monitor does not light up or the buzzer does not sound, there is probably a failure in the monitor, so please contact your Komatsu distributor for repairs. B. After approximately two seconds, the screen will change to the working mode/travel speed display monitor. Next, it will switch to the standard screen.

Engine coolant temperature gauge (10) Engine coolant temperature monitor (11) Fuel gauge (12) Fuel level monitor (13) Hydraulic oil temperature gauge (14) Hydraulic oil temperature monitor (15) C. If the hydraulic oil temperature gauge is out or caution lamp (16) stays lit red, immediately check the item that lights up red. D. If the maintenance interval has passed, maintenance interval monitor (17) lights up for 30 seconds. Press maintenance switch F5 (18), check the item, and carry out maintenance immediately. For details of the method of checking the maintenance interval, See “Maintenance Selector Switch” on page 2-42 in the explanation for each component. PC200LC-8 2-133