OPERATION Moving Machine Backward 1. Set lock lever (4) in the FREE position (F), fold the work equipment, and raise it 40 to 50 cm (16 to 20 in) from the ground. If the view to the right side is poor, raise the boom to ensure better visibility. 2. Operate the right and left travel levers (5), or the right or left travel pedals (6) as follows: When sprocket (A) is at the rear of the machine: Slowly pull the levers backward, or slowly depress the rear part of the pedals to move the machine backward. When sprocket (A) is at the front of the machine: Slowly push the levers forward, or slowly depress the front part of the pedals to move the machine backward. 3.
For machines equipped with a travel alarm (if equipped), check that the alarm sounds. If the alarm does not sound, please contact your Komatsu distributor for repair. Remark In cold temperatures, if the machine travel speed is not normal, thoroughly perform the warming-up operation. In addition, if the undercarriage is clogged with mud and the machine travel speed is not normal, remove the soil and mud from the undercarriage. PC200LC-8 2-153