OPERATION Operations Using Bucket Dropping Force Do not use the dropping force of the machine for digging, or use the dropping force of the bucket as a pickaxe, breaker, or pile driver. This will drastically reduce the life of the machine. Operations Using Machine Dropping Force Do not use the dropping force of the machine for digging. Digging Hard Rocky Ground Do not attempt to directly excavate hard rocky ground with the work equipment. It is better to excavate it after breaking up by some other means. This will not only save the machine from damage but will make for better economy. Sudden Lever Shifting High Speed Travel 1.
Never carry out sudden lever shifting as this may cause sudden starting. 2. Avoid sudden lever shifting from forward (A) to reverse (B) (or from reverse (B) to forward (A)). 3. Avoid sudden lever shifting change such as sudden stopping from near top speed (lever release operation). Long-Time Continuous Travel Operations Do not travel continuously at high speed for 1.5 hours or more. The lubricating oil inside the track rollers and final drive will rise to a high temperature, and there is danger that this will cause damage to the oil seal or leakage of oil.
When traveling continuously for a long time, stop the machine for 30 minutes every 1.5 hours to allow the lubricating oil inside the track rollers and final drive to cool down. PC200LC-8 2-163