OPERATION Stowing Radio Antenna Loosen bolt (2) of radio antenna (1) at the rear of the cab, lower the antenna, then tighten bolt (2) again to secure radio antenna (1) in position. When unloading the machine from the trailer and operating it, follow the opposite procedure from stowing to set radio antenna (1) vertical, then secure it in position with bolt (2). Rearview Mirrors The mirrors are at the positions shown in the diagram on the right. After installing the mirrors, be sure to adjust them, referring to “Rear- view Mirrors” on page 2-126. If they are damaged, or are to be removed for shipment, or are to be installed again, use the following procedure. PC200LC-8 2-183