Komatsu — Electrical System

OPERATION OTHER TROUBLE Electrical System ( _ ): Always contact your Komatsu distributor when dealing with these items. In cases of problems or causes which are not listed below, contact your Komatsu distributor for repairs.

PC200LC-8 2-203 Problem Main causes Remedy Lamp does not glow brightly even when the engine runs at high speed • Defective wiring, deterioration of battery • Loose fan belt • (Check, repair loose terminals, disconnections, replace battery) Lamp flickers while engine is running • (Replace fan belt, Check tension) Charge level monitor does not go out even when engine is running • Defective alternator • Defective wiring • (Replace) • (Check, repair) Abnormal noise is generated from alternator • Defective alternator • (Replace) Starting motor does not turn when starting switch is turned to ON • Defective wiring • Defective starting motor • Insufficient battery charge • (Check, repair) • (Replace) • Charge Pinion of starting motor keeps going and out • Insufficient battery charge • Defective safety relay • Charge • (Replace) Starting motor turns engine sluggishly • Insufficient battery charge • Defective starting motor • Charge • (Replace) Starting motor disengages before engine starts • Defective wiring, defective ring gear pinion • Insufficient battery charge • (Check, repair) • Charge Engine pre-heating monitor does not light • Defective wiring • Defective heater relay • Defective monitor • (Check, repair) • (Replace) • (Replace) Oil pressure monitor does not light up when engine is stopped (starting switch at ON position) • Defective monitor • Defective caution lamp switch • (Replace) • (Replace) Outside of electrical heater is not warm when touched by hand • Defective wiring • Disconnection in electric heater • Defective operation of heater • (Check, repair) • (Replace) • (Replace)