Komatsu — Wear Parts List

MAINTENANCE WEAR PARTS Replace wear parts such as the filter element or air cleaner element at the time of periodic maintenance or before they reach the wear limit. The wear parts should be replaced correctly in order to ensure more economic use of the machine. When replacing parts, always use Komatsu genuine parts. As a result of our continuous efforts to improve product quality, the part number may change, so inform your Komatsu distributor of the machine serial number and check for the latest part number when ordering parts. Wear Parts List The parts in parentheses are to be replaced at the same time.

3-8 PC200LC-8 Item Part Name Q'ty Change interval Engine oil filter Cartridge 1 Every 500 hours Fuel pre-filter Cartridge 1 Every 500 hours Hydraulic tank breather Element 1 Every 500 hours Hydraulic oil filter Element (O-ring) 1 (1) Every 1000 hours Fuel main filter Cartridge 1 Every 1000 hours Corrosion resistor (if equipped) Cartridge 1 Every 1000 hours A/C RECIRC filter Filter 1 Annually A/C FRESH filter Element 1 Annually Air cleaner Element assembly 1 - Additional filter for breaker (if equipped) Element (O-ring) (O-ring) 1 (1) (1) - Electric heater Gasket 2 - Bucket (PC200) Vertical pin type Tooth (Pin) (Lock) 5 (5) (5) - Horizontal pin type Tooth (Pin) 5 (5) Side cutter (left) Side cutter (right) (Bolt) (Nut) 1 1 (8) (8) Side shroud Side shroud (Bolt) (Bolt) 2 (6) (6) - Pilot filter (if equipped) Element (O-ring) 1 (1) - Seat belt 1 Every 3 years after the start of usage or 5 years after the date of manufacture or at first sign of wear or damage