Komatsu — Specifications

OPTIONS, ATTACHMENTS LONG TERM STORAGE If the equipment is not to be used for a long time, do as follows. Set the stop valve in the LOCK condition. Install the plug and O-rings to the valves. Set the lock pin at the LOCK position. If there is no breaker or general attachment installed, operating the pedal may cause overheating and other problems. Specifications Hydraulic specifications Max.

merging oil flow 214 x 2 liters / min Safety valve of service valve relief setting pressure 280 kgf/cm 2 (3980 psi) (except B mode) Safety valve of service valve cracking pressure 250 kgf/cm 2 (3550 psi) (except B mode) Safety valve of service valve relief setting pressure 210 kgf/cm 2 (2980 psi) (B mode) Safety valve of service valve cracking pressure 155 kgf/cm 2 (2200 psi) (B mode) In addition, valves with a safety valve relief set pressure of 250 kgf/cm 2 (3550 psi) and relief valve cracking pressure of 205 kgf/cm 2 (2911 psi) are also available so please contact your Komatsu distributor. PC200LC-8 5-25