OPTIONS, ATTACHMENTS TRAPEZOIDAL BUCKET Use the trapezoidal bucket when digging trapezoidal ditches in fields. By installing the variable plate, it is possible to excavate three angles of ditch slope face (45°, 40°, 38°). The position of installation of the variable plate is different for each ditch slope face angle (45°, 40°, 38°). Digging Work Operate the boom, arm, and bucket so that line A of the side plate of the bucket is always perpendicular, then carry out digging. Horizontal calculation plate B is welded to the bucket pin hole portion, so when digging, operate so that the plate is horizontal during the digging operation.
Ditch Slope Face 45 Degrees Use the bucket only or install the variable plate using the ditch slope angle holes, and use the method above for digging. 5-30 PC200LC-8