OPTIONS, ATTACHMENTS HANDLING CLAMSHELL BUCKET Use a clamshell bucket for digging or loading soil for side ditching and in limited areas. Digging Method Digging is carried out with the clamshell pushed by the boom, but when operating the bucket, raise the boom slightly and carry out digging. When the clamshell bucket rotates, relieve the hydraulic pressure in the bucket cylinder, then return the lever to the HOLD position. The rotation is locked for a short time. Precautions During Operation It is dangerous to carry out sudden steering, sudden swings, or sudden stops when using the clamshell bucket. Avoid such operations. When pushing with the boom, keep the clamshell straight.
Do not swing the bucket to the side to break up or cut rocks or soil. Do not use the bucket for driving piles or removing piles. When the machine is not being used, open the bucket and lower it to the ground to set the bucket in a stable position. Remark Remove the clamshell bucket from the arm before transporting the machine. Lubrication Prepare a grease gun 1. Lower the work equipment to the ground and set it in a stable condition before stopping the engine. 2. Using a grease gun, apply grease to the grease fittings marked by arrows (12 places). 3. After greasing, wipe off any old grease that was pushed out. PC200LC-8 5-33