Komatsu — INSTRUMENTS AND CONTROLS

A:CHECK MONITOR GROUP (Check items before starting) * Do not rely on the “CHECK MONITOR GROUP (Check before starting)” only for the check before starting. Always make the check by referring to the section on CHECK BEFORE STARTING. * Park the machine on level ground and check the monitor lamps. * Confirm that these monitor lamps light for about 3 seconds after turning the starting switch to ON. If any monitor lamp does not light, ask your Komatsu distributor to inspect that monitor lamp. 1. RADIATOR COOLANT LEVEL MONITOR This warns of any drop in the radiator cooling water level. If it flashes, check the cooling water level in the radiator and sub-tank, and add water. 2.

ENGINE OIL LEVEL MONITOR This monitor indicates a low oil level in the engine oil pan. If the monitor lamp flashes, check the oil level in the engine oil pan and add oil as required. 3. HYDRAULIC OIL.LEVEL MONITOR This monitor indicates a low oil level in the hydraulic tank. If the monitor lamp flashes, check the oil level in the hydraulic tank and add oil as required. B: CAUTION MONITOR GROUP (Caution items) If any abnormality occurs while the engine is running, the appropriate monitor lamp will flash to indicate the abnormality at the same time. * Park the machine on level ground and check the monitor lamps.

* Confirm that these monitor lamps light for about 3 seconds after turning the starting switch to ON. If any monitor lamp does not light, ask your Komatsu distributor to inspect that monitor lamp. 1. CHARGE MONITOR This monitor indicates an abnormality in the charging system while the engine is running. If the monitor lamp flashes, check the charging circuit. -8-