Komatsu — PERIODICAL REPLACEMENT OF SAFETY PARTS

PERIODICAL REPLACEMENT OF SAFETY PARTS To ensure safety at all times when operating or driving the machine, the user of the machine must always carry out periodic maintenance. In addi- tion, to furher improve safety, the user should also carry out periodic replacement of the parts given in the table on the next page. These parts are particularly closely connected to safety and fire prevention. With these parts, the material changes as time passed, or they easily wear or deteriorate. However, it is difficult to judge the condition of the parts simply by periodic maintenance, so they should always be replaced after a fixed time has passed, regardless of their condition.

This is necessary to ensure that they always maintain their function compeletly. However, if these parts show any abnormality before the replacement interval has passed, they should repaired or replaced immediately. If the hose clamps show any deterioration, such as deformation or cracking, replace the clamps at the same as the hoses. Carry out the following inspection for hydraulic hoses in addition to the periodic replacement parts listed on the next page. If any abnormality is found, tighten, replace, or take any other necessary action.

Category of inspection Inspection item Check before starting Leakage from joints or caulked portion of fuel or hydraulic hoses Periodic inspection Leakage from joints or caulked portion of fuel or hydraulic hoses (monthly inspection) Damage (cracks, wear and tear) of fuel or hydraulic hoses Periodic inspection (yearly inspection) Leakage from joints or caulked portion of fuel or hydraulic hoses Interference, deterioration, twisting, damage (cracks, wear and tear, crushed Darts) of fuel or hvdraulic hoses - 106-