d. TURBOCHARGER Excessive carbon or oil sludge adhering to the turbocharger blower impeller may deteriorate normal performance of the turbocharger and may sometimes damage it. Contact your Komatsu distributor. 1. Remove the turbocharger oil supply tube and the drain tube. Then, remove the connection area of the intake manifold and the blower hous- ing so that the blower impeller can be seen. 2. Using light oil, wash the impeller to eliminate carbon adhered on the sur- face. * Do not use wire brushes or the like to prevent damage to the impeller surface. 3. Pour light oil through the turbocharger oil filler.
Turn the blower impeller several turns so that foreign materials such as sludge can be washed away. 4. Using your fingers, turn the impeller vigorously for one revolution or more. If there is no sigh of interference or catching, the impeller is nor- mal. * tf the impeller seems to turn heavily, contact your Komatsu distributor to ask for repair or replacement. 5. If the impeller is found normal after this check, supply engine oil to the turbocharger. e. ALTERNATOR AND STARTING MOTOR As the hours of engine employment indicate that the brushes are already worn out, you should request repair from a Komatsu distributor.
* They should be repaired every 1000 hours, if the machine is frequently operated at night. f. VIBRATION DAMPER Check the vibration damper for cracks or separation on rubber surface. If there are cracks or separation, contact your Komatsu distributor for replacement. g. ENGINE VALVE CLEARANCE Ask Komatsu distributor to check engine valve clearance because special tools should be used. - 140-