BEFORE STARTING OPERATION 1. Examine the lay of the land and the kind of soil at the work site to determine the dangerous points and the best method of operation. Proceed with the work only after making safety arrangements about the dangerous points. 2. Inspect leakages from the fuel, lubricating and hydraulic systems. Check that the shoe bolts are not loose, and that no other parts are damaged or missing. Machines having such failures should not be operated. 3. When getting on or off the machine, use the handrail provided. Do not jump up or down from the machine. 4. Do not leave parts or tools lying around in the vicinity of or on the floor of the operator’s cab.
Keep everything in its proper place. 5. Wipe off thoroughly any grease, oil or mud on the handrail, floor or control levers. Failure to do this may cause you to slip. 6. Check the level of the fuel, lubricants and cooling water. Extinguish ciga- rettes before checking or replenishing. Check that the radiator cap and each oil filler caps or plugs are firmly tightened. 7. Adjust the operator’s seat until it is in the most comfortable position for operating. Always sit in the seat while operating. Do not operate the machine from any other position. 8. To ensure the safety of workers near the machine, always sound the horn to warn them before starting the engine and moving the machine.
Be particularly careful to check that the rear is clear before backing the machine. 9. Inspect the inside of the engine room and remove any dead leaves or papers. Dead leaves or papers are highly inflammable and can cause fires. 10. Before starting the engine, confirm that all control levers are in NEU- TRAL. -4-