C. Dehumidity and heating Set the knobs to the following positions and a dry, fresh, warm breeze will be flowed from the vents at operator’s feet. l Outlet change-over knob (1): FOOT 0 Heater temperature knob (2): See table below. l Blower switch (3): See table below. l Cooler temperature knob (4): HIGH Control knob Heater temp. knob (2) Blower switch (3) Purpose &Z Winter n_c .= E-z Spring and HIGH HIGH ;.EP Autumn MEDIUM MEDIUM or LOW or LOW If very damp air is used for heating, only hot, humid air will be sent to the cab, producing an unpleasant atmosphere. This air conditioner first cools the air to dehumidify it, and then reheats it to produce the opti- mum heating conditions.
In addition, there is no problem with the win- dows misting up. This setting is particularly useful in spring, autumn or on rainy days when the air is very damp. When the outside temperature is from 2°C to 6.5”C, a low pressure cut switch functions to automatically and switch the compressor off. In this situation it is impossible to use the combination of dehumidifying and heating. - 32 -