Komatsu — OPERATING YOUR MACHINE

OPERATING YOUR MACHINE A: BEFORE STARTING THE ENGINE 1. Carry out an initial inspection. (For details of the inspection, see CHECK BEFORE STARTING.) 2. Is lock lever (1) in the LOCK position? (a): Free (b): Lock B: TO START THE ENGINE 1. Set fuel control dial (1) at the low idling (MIN) position. (a): Low idling 2. Turn the key of starting switch (2) to the START position. 3. When the engine starts, return the key of starting switch (2) to the ON position. (The key will return automatically when released). * If engine will not start, repeat the starting procedure after about 2 minutes. * Do not leave the key in START for more than 20 seconds.

* To start engine in cold weather, refer to COLD WEATHER OPERATION. Special starting When starting after running out of fuel, fill with fuel, then fill the fuel fil- ter cartridge with fuel and bleed the air from the fuel system before start- ing. * For details of bleeding the air, see the section on replacement of the FUEL FILTER.. Starting machine after long period out of use When starting the machine after a long period out of use, first cancel the automatic-up warming function as follows. 1. Turn the starting switch key to the ON position. 2. Turn the fuel control dial to the low idling (MIN) position, then turn it to the full position (MAX) and hold it there for 3 seconds. 3.

Turn the fuel control dial back to the low idling (MIN) position, and turn the strating switch key to the START position to start the engine. * When starting in cold weather and using preheating, cancel the automatic warming-up operation after completion of the preheating. - 56-