D: TO MOVE THE MACHINE OFF 1. Turn swing lock switch (1) ON (ACTUATED) and check that swing lock lamp (2) lights up. (a): ON (actuated) (b): OFF (canceled) (c): Front of machine 2. Turn fuel control dial (3) and increase the engine speed. (a): Full speed 3. Set lock lever (4) in the FREE position, fold the work equipment, and raise it 40 - 50 cm from the ground. (a): Free (b): Lock 4. Slowly incline left and right traveling and steering levers (5) in the for- ward (a: forward moving off) or reverse (b: reverse moving off) direction, and move off. A Check whether the track frame is facing forward or backward before operating the traveling and steering levers.
A Avoid abruptly operating the traveling and steering levers with the fuel control lever fully open, as this will cause the machine to move off sud- denly. A For machine with auto-deceleration device, if the lever is operated inside the deceleration range, the engine speed will rise suddenly. - 60 -