Komatsu — OPERATING YOUR MACHINE

H: TO STOP THE MACHINE 1. Put the left and right traveling and steering levers (1) in the neutral posi- tion. (a): Neutral 2. Turn fuel control dial (2) to lower the engine speed. (a): Low idling 3. Lower the bucket horizontally until its underside touches the ground. 4. Set lock lever (3) in the LOCK position. (a): Free (b): Lock A When stopping the machine, select flat hard ground and avoid danger- ous places. If it is unavoidably necessary to park the machine on a slope, insert blocks underneath the track shoes. As an additional safety measure, thrust the bucket into the ground. I: TO STOP THE ENGINE 1.

Run the engine at low idling speed for about 5 minutes to allow it to gradually cool down. 2. Return starting key (1) to the OFF position and remove key. t If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine apart from an emergency. * In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it. - 70 -