HANDLING THE TRAPEZOIDAL BUCKET This bucket is used in sloped ditch digging work in the farm. The three different ditch inclination can be obtained by changing the angle of the attached plate. The angles available are 45”, 40” and 38”. Install the bucket using the holes for 45”, 40” and 38” ditch. How to perform excavation Operate the boom, the arm and the bucket to make the line A of the side-plate of the bucket vertical. The guide plate B to check this position is installed beside the bucket pins. Accordingly, hold this plate horizontal when digging. Attached plate and shape of ditch (a): Common hole 45”, 40”, 38 (b): 45” ditch (c): 40” ditch (d): 38” ditch (e): 38”, 40” common hole 1.
Shape of ditch 45” bucket. 2. Shape of ditch 40” bucket. 3. Shape of ditch 38” bucket. * Hold the plate horizontal for every ditch angle. - 80 -