MAINTENANCE SECTION 5 Page 17 AIR CLEANING SYSTEM 5.6.4. AIR INTAKE SYSTEM 5.6.4.1. Pre-cleaner Fig. 5.3. Pre-cleaner Assembly 1. Pre-cleaner Filter 2. Air Cleaner 3. Air Intake Tube Clamps The dome of the pre-cleaner hood serves as a rain shield and the screen prevents chaff and coarse dirt from getting into the air cleaner. Keep this screen clean from all chaff, oil or dust. Clogged holes in the screen will reduce the power of the engine by restricting the flow of air. Loosen the clamp screw on the pre-cleaner hood. Twist and pull upward to remove the cap. Use compressed air to clean the screen.
If compressed air is not available, wash in clean hot water or water containing a small amount of nonsudsing detergent. IMPORTANT: Never wash pre-cleaner installed on a machine as water may penetrate to the engine and cause a serious damage. 5.6.4.2. Checking air intake system for leaks Check the air intake system for hose cracks, loose clamps. Tighten loose connection, replace broken parts to eliminate leaks, which may damage or impair the engine. 5.7. BELTS General WARNING! Keep clear of the fan and fan belts when the engine is running. Rotating fan and belt contact can cause injury. DRESSTA TD-15H