DRESSTA Co. Ltd. TD-15H — 5.11.2. CHANGING THE CRANKCASE OIL AND OIL FILTER

SECTION 5 MAINTENANCE Page 28 ENGINE Fig. 5.13.Location of Oil Drain Plug Cover in Crankcase Guard 1. If the engine is cool start it and run it until it reaches 60[ ° C]. Then stop the engine. 2. Remove the oil pan door to gain access to the crankcase oil pan drain plug. Remove the drain plug and allow the oil to drain completely into a suitable container. 3. Clean the oil filter and filter head. Remove the filter. 4. Clean the filter head in the seal contact area. Fig. 5.14. Lubricating Oil Filter IMPORTANT: Use only recommended filters available from Authorized Distributor of Construction Equipment. 5.

Apply a little clean engine oil to the seal of a new filter, fill the filter with engine oil and thread the filter on by hand per instructions specified on the filter. IMPORTANT: Thread it filters by hand. Do not use any tools to install a filter because this can damage. TD-15H DRESSTA