MAINTENANCE SECTION 5 Page 43 5.15. MOUNTED EQUIPMENT 5.15.1. COMPLETE BLADE REMOVAL AND INSTALLATION Fig. 5.36. Complete Semi-U Blade If for any reason the complete blade is to be removed from the tractor proceed as follows: 1. Place the blade on level ground and block up the ends of the push arms or C-frame close to the trunnions. This will maintain the proper height for reassembly. 2. For machines with hydraulic tilt: disconnect the hoses (Fig. 5.37). Fit and secure plugs to the ends of hoses and pipes. Fig. 5.37. Blade Tilt Hoses Connection Location DRESSTA TD-15H