MAINTENANCE SECTION 5 Page 51 TRANSMISSION SYSTEM Fig. 5.44. Grease Nipples of Universal Joints. 5.18.2. CHECKING THE OIL LEVEL 1. With the engine shut down open the L.H. side rear access door, unscrew the T handle of the oil level gauge, remove the gauge and wipe it clean. Fig. 5.45. Rear Frame Oil Level 2. Insert the gauge fully into the filler sleeve. Do not tighten. Remove the gauge and check the lubricant level. If necessary, add oil through the filler to bring the level up. Reinstall and secure the gauge. The gauge has two marks: for low oil level and for high oil level for HOT oil on one side and two marks: for low oil level and for high oil level for COLD oil on the other. side.
Check the oil level with the engine stopped. IMPORTANT: Never operate a machine if the oil level is at or below the LOW mark on the oil level gauge . DRESSTA TD-15H