SECTION 5 MAINTENANCE Page 60 UNDERCARRIAGE 5.19.8. EQUALIZER BAR Periodically check the condition of wear pads that support equalizer bar ends (3) in the track frame rebound brackets. Distance (A) between equalizer bar (3) and rebound bracket (1) is to be measured periodically too. Perform measurement when both track frames are leveled. Add or remove such a number of shims (2) to obtain a distance of 4.8 - 6.3 [mm]. Replace pads if any cracks are found. Fig. 5.56. Rebound Gap of the Equalizer Bar 1. Rebound Bracket 2. Shims 3. Equalizer Bar 4. Pad 5.19.9. SPROCKETS After each 1000 hour of operation check and retorque, if necessary, the sprocket mounting hardware to 450 [Nm]. Fig. 5.57.
Sprocket Wheel Mounting Bolts TD-15H DRESSTA