DRESSTA Co. Ltd. TD-15H — 5.21.1. AIR CONDITIONING FILTER CLEANING

SECTION 5 MAINTENANCE Page 62 ADJUSTING HAND AND FOOT CONTROLS After the adjustment has been made lubricate linkage and fill bearings with grease through the lubricating fittings (refer to "LUBRCATING FITTINGS") and check if the machine is stopped with the Decelerator–Brake pedal applied. Perform a brake test as follows: start the engine and bring the transmission system to operating temperature shift to 2nd speed with engine at high speed and brake the machine for a while by applying the decelerator and brake pedal and brake lock. With correct adjustment made the machine should stop. If in doubt contact Authorized Distributor of Construction Equipment. 1. Engine Speed Lever 2.

Hand Steering Lever 3. Decelerator and Brake Pedal 4. Fuel Pump Lever A – Adjustable Control Elements Fig. 5.59. Hand and Foot Controls 5.21. CAB AND ROPS A dozer can be equipped with a ROPS protective structure with a canopy or a cab with a separate ROPS protective structure. 5.21.1. AIR CONDITIONING FILTER CLEANING Open two latches and remove the filter. Clean the filter with compressed air directing the air in the reverse direction to that of normal operation. Clean the filter housing. Reinstall the filter and secure the cover with the latches. TD-15H DRESSTA