OPERATING SECTION 4 Page 21 STOPPING THE ENGINE (Fig. 4.17) 1. Using control lever (3 and 4) lower all mounted equipment to the ground. Depress brake and decelerator pedal (5) and place transmission shift lever (7) into NEUTRAL. 2. Apply transmission neutral lock lever (9). 3. If the engine has been operated under load, operate it at idle speed for 3 to 5 minutes to allow the engine to cool down in a gradual and uniform manner. IMPORTANT: Immediate engine shut-down after operation under load may result in engine damage. 4. Depress and lock brake and decelerator pedal (5). 5.
Move engine speed and shut down lever (8) to large notched OFF position – the solenoid valve will shut down the engine. 6. Turn electric master switch (6) in OFF position. 4.8. DRIVING THE MACHINE (Fig. 4.18) CAUTION! : Read the SAFETY PRECAUTIONS in Section 2 before operating a machine. IMPORTANT: Before operating check all instruments. WARNING! Never haul passengers. Only the operator should be on the machine when it is moving. 1. Brake and Decelerator Pedal 2. Brake Lock Lever 3. Transmission Neutral Lock Lever 4. Engine Speed and Shut Down Lever 5. Transmission Shift Lever Fig. 4.18. Driving the Machine DRESSTA TD-15H