SECTION 4 OPERATING Page 22 DRIVING THE MACHINE (Fig. 4.18) WARNING! Sit in the operator's seat before operating the controls. Keep your hands and footwear free of grease, water and mud to insure positive control movements. WARNING! Before operating a machine adjust the seat to allow full access of all controls and fasten the seat belt. Failure to do so could result in serious injuries or death. WARNING! Never get on or off the machine while it is moving because serious injury or death could result. 1. Place the engine speed and shut down control lever (4) in the high idle position (Fig. 4.16). 2. Depress the decelerator pedal (1) to decrease engine speed. 3.
Move forward the neutral lock lever (3) from ON to OFF position. 4. Place transmission shift lever (5) in the desired range. Refer to "SHIFTING THE TRANSMISSION". 5. Gradually release brake and decelerator pedal (1). 4.9.SHIFTING THE TRANSMISSION The transmission has three speeds in both the forward and reverse ranges. The ranges and speeds are controlled by a transmission shift lever. Fig.4.19. Transmission Shift Lever Position 1. Rear Gears 2. Neutral Position 3. Front Gears TD-15H DRESSTA