HEATING AND AIR CONDITIONING Tips for Efficient Cooling Fresh Air/Recirculation Switch Sleeper Override Switch (for vehicles with a sleeper) An air conditioner can reduce fog build up on the windshield by setting it to the defrost or the floor/defrost air selection. To increase the effectiveness of the air conditioner, use the A/C button in the ON position, increase the air temperature setting and/or increase the fan speed. This switch controls the source of the air flowing into the heater and air conditioner unit Press this button if the user wants to control the on/off function of the sleeper heating and air conditioning unit.
Recirculated air may reduce the amount of time needed to cool down the interior of the vehicle (when used with A/C) and may also help reduce undesired outside odors from reaching the interior of the vehicle. This button can be engaged manually in any non-defrost modes. Using this button does not allow this control unit to control sleeper blower speed or sleeper temperature. It only turns the sleeper heating and air conditioning unit on or off. 3 If the cabin becomes humid or damp, use the air conditioner with the fan on, with fresh air (not in recirculate air mode) and the A/C in the ON position to dry the cabin air.
NOTE You may notice changes in sound be- tween recirculated mode and other air- flow modes. In situations where more cooling of the cab is required, make sure the system is in the recirculation mode. This setting will be more effective than using fresh air. (03/17) Y53-6076-1B1 3-77