HEATING AND AIR CONDITIONING How To Use The System Turn the Air Flow Control Dial to Dash Vents. Turn the Air Flow Control Dial to Floor Vents. The engine must be running for the heater and air conditioner to generate hot and cold air. Adjust the Temperature Control Dial clockwise until the air temperature feels comfortable. To Cool If the outside air is not cold enough to cool the cab, press to engage the compressor which will deliver colder air. 3 Push the Fresh Air/Recirculation Switch to the Fresh Air mode (Blue indicator light off). Manually setting the system to recirculate air will increase the effectiveness and uses the least amount of fuel.
Using this function in "manual" mode will provide the maximum heating performance. For more cooling effect, you may need to press the switch back to recirculation mode. To Dehumidify Turn ON the Fan Control Dial to the desired fan speed. To Heat Push the Fresh Air/Recirculate Switch to the Fresh Air mode (Blue indicator light off). Turn the Fan Control Dial ON to the desired fan speed. Turn Temperature Dial to Desired Setting. Turn ON the Air Conditioning Switch (Blue indicator light on). 3-78 Y53-6076-1B1 (03/17)