HEATING AND AIR CONDITIONING Sleeper Heater - A/C Controls (optional) Turn ON the Fan Control Dial to the desired fan speed. Fresh air and air conditioning are automatically turned ON. Adjust the Temperature Control Dial clockwise to full heat. A separate switch on the dash HVAC unit will send power to the or sleeper control unit The button on the cab HVAC unit must be pressed and in the on mode to use the sleeper controls. The sleeper control unit has three controls: Adjust the Temperature Control Dial until the air temperature feels comfortable. CAUTION During extreme cold weather, do not blow hot defroster air onto cold wind- shields. This could crack the glass.
Turn the Air Flow Control Dial to De- frost and adjust the fan speed ac- cordingly while the engine warms. If the engine is already warm, move the Temperature Control Dial to cool, then gradually increase the temper- ature when you see that the wind- shield is starting to warm up. Failure to comply may result in equipment damage. 3 The air conditioner removes moisture from the air while the heater heats the air. 1. Air speed control 2. Air conditioner compressor on/off To Defog and Defrost the Windshield 3. Air temperature control Turn the Fan Control Dial clockwise to the highest fan speed. Turn the Air Flow Control Dial to Defrost Vents.
Unlike the cabin air temperature controls, the sleeper temperature control will alter the air temperature (03/17) Y53-6076-1B1 3-79