OPERATING THE TRANSMISSION Driving Tips and Techniques on page 4-44. Shifting Gears in a New Vehicle Clutch Brake and Travel Shift carefully in a new vehicle. The transmission may be a little stiff at first. Avoid gear clashing, by closely following these procedures. The clutch brake is used for stopping transmission gears, allowing you to easily shift into first gear or reverse without grinding gears. Approximately the last Ѕ inch (13 mm) of clutch pedal travel activates the clutch brake. When you are operating a new vehicle or one that has been exposed to cold weather, you want the transmission lubricant (fluid) to circulate and coat the contacting surfaces of the gears.
Metal contacting metal in moving parts may seriously damage your transmission, do not drive in one gear for long periods of time until the transmission lubricant has a chance to coat all contacting surfaces. CAUTION Do not push the clutch pedal com- pletely to the floor when shifting while the vehicle is in motion. us- ing the clutch brake while shifting a vehicle in motion will damage the clutch brake. A nonfunctioning clutch brake will make shifting very difficult when the vehicle is station- ary. 4 To apply the clutch brake (while the vehicle is stopped) fully depress the clutch pedal to stop the gears.
With the throttle at idle, select first gear then release the clutch pedal to let the 4-16 Y53-6076-1B1 (03/17)